Humbrol Enamel Tinlets - Shop

A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other substrates.
Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour)

Can be used on a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability)
A 14ml tin covers approx.0.3m depending on thickness of application
Brush on straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry.

Drying time Gloss: 1-2 hours Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat in 6 hours minimum (preferably overnight)

To clean brushes use Humbrol Enamel Thinners
To clean airbrush, flush thoroughly using Humbrol Enamel Thinners.

Product is permanent once dry.

Products In This Category:

Showing 31 - 38 of 38 results